+86-22-59657343
Feiya American Standard (UL) Industrial Cables Kynar/Hmwpe Cathodic Protection Power Cable

Feiya American Standard (UL) Industrial Cables Kynar/Hmwpe Cathodic Protection Power Cable

KYNAR/HMWPE cable is a cathodic protection cable with strong anti-corrosion ability and long service life. The cable insulation is extruded with super molecular weight polyethylene sheath.
Send Inquiry
Product Details of Feiya American Standard (UL) Industrial Cables Kynar/Hmwpe Cathodic Protection Power Cable

Product Introduction

[[MetaDescription]]

Product Introduction

 

          KYNAR/HMWPE cable is used for ac/DC rated voltage up to and including 450/750V control and monitoring circuits and protection circuits.The conductor is allowed to work at 70℃ for a long time, and the maximum working temperature shall not exceed 160℃ in case of short circuit.With good shielding performance, can be used in a variety of environments.It can be widely used in power plants and power stations, and can be laid indoors, in cable trench, pipe, buried, vertical shaft and other occasions with large mechanical tension.

 

  • Product description:
  1. The cable conductor shall be made of bright soft copper wire with a round or fanny-shaped twisted compacting core. The surface of the conductor shall be smooth, free from oil stains, no damaged insulation burrs, sharp edges, and no raised or broken single wire.
  2. The maximum rated temperature of the cable conductor during continuous operation shall be 90℃;In case of short circuit (the longest duration shall not exceed 4S), the maximum temperature of the cable conductor shall not exceed 250℃.
  3. See GB12706 for the nominal insulation thickness of each section, and the average insulation thickness shall not be less than the nominal value.The minimum thickness measured at any point shall not be less than 90% of the nominal value;Eccentricity of any section :(maximum measured thickness - minimum measured thickness)/maximum measured thickness ≤15%.
  4. The cable core shall be tightly filled with non- hygroscopic soft material, and the cable body shall be round in shape after the cable is made;The degree of roundness should not be more than 15%, and the outer wrapping tape should be used.
  5. When the cable is armored with galvanized steel tape, the winding shall be smooth and smooth.

 

Product Parameter

 

Technical parameters
Long-term allowable working temperature of cable conductor -40~+50℃
Monthly average maximum relative humidity 95%(+25 hours)
The permissible temperature for laying and installation of the cable shall be no less than -10℃
Minimum bending radius of the cable 10 times the outer diameter of the cable

 

 

[[ContDescription]]

Hot Tags: KYNAR HMWPe cable, China, suppliers, manufacturers, factory, cheap, iccp data monitoring for strategic planning management, garden tool junction box, Cathodic Protection Spark Clearance, irrigation junction box, marina facility protection, transformer rectifier for testing equipment

[[ProKeywords]]

SPEC DATA

[[TD-You May Also Like]]
[[ShowRoomListRandom]]

Send Inquiry

Send a Message