MGPS Control Panel

MGPS Control Panel

          provides DC output to the anode copper, aluminum and iron. The device includes a step-down transformer and rectifier and a batch of independent outputs. The DC output is controlled to supply current to the anode according to the potentiometer settings installed in the control panel. Each DC output circuit provides a DC amperometer and a device for measuring the output DC voltage. In the event of a fault, the AC power supply is protected against short circuits and overloads via a magnetic reed switch. The indicator indicates the main supply line and the other two switches are used for isolation. All terminal block cables are in and out at the bottom of the control panel. A separate ground connection should be provided from the submarine door to the junction box. Provide the necessary loop for the current.

          MGPS (Marine Growth Prevention System) is a system used to prevent the attachment and growth of Marine organisms, and is mainly applied to Marine structures, ships and Marine equipment. It effectively inhibits the adhesion of Marine organisms such as algae, shellfish and barnacles through physical and chemical methods, thereby protecting the surface of the equipment from damage such as corrosion, increased friction and reduced energy efficiency. The use of MGPS can effectively extend the service life of equipment and reduce maintenance costs.

• Product Features:

1. Stable DC output: Usually, it can convert the input AC power into stable low-voltage DC power, which can ensure a stable current is provided for the anode of the Marine organism defense system, enabling the anode to continuously release effective substances and prevent the attachment of Marine organisms.
2. Current regulation function: It can precisely adjust the magnitude of the output current according to factors such as the seawater environment and the submerged area of the hull. For example, when the conductivity of seawater is strong or the submerged area of the hull is large, the output current is automatically increased to ensure the effect of preventing Marine organisms. Conversely, the current will be reduced to avoid energy waste and excessive anode loss.
3. High reliability: It is equipped with protection functions. The output current of the power supply, the upper and lower limit alarm values of the current can be set on the touch screen.

Hot Tags: mgps control panel, China, suppliers, manufacturers, factory, cheap, Sacrificial Anode, Buried Waterproof Junction Box, Cathodic Protection Anode, Explosion proof Test Pile, Transformer Rectifier, Portable Transformer Rectifier