The function of high-power electroplating rectifier: The rectifier is a rectifier installation, which is simply an installation that converts AC to DC. It has two main functions: it converts alternating current into direct current, and supplies a load after filtering, or supplies an inverter; it provides charging voltage to the battery. Therefore, it also acts as a charger at the same time.
Use of high-power rectifiers: The main application of rectifiers is to convert AC power to DC power. Since all electronic equipment needs to use direct current, but the power supply of the power company is alternating current, so unless a battery is used, a rectifier is indispensable in the power supply of all electronic equipment. It is much more complicated to stop the conversion of the voltage of the DC power supply.
One method of DC-DC conversion is to first convert the power supply to AC, then use a transformer to change the AC voltage, and finally rectify it back to the DC power supply. Karry's high-power rectifier is also used in the detection of AM radio signals. The signal may be amplified before detection. If it is not amplified, a diode with a very low voltage drop must be used.
When using the rectifier for demodulation, it is necessary to carefully match the capacitor and load resistance. If the capacitance is too small, too much high frequency components will be transmitted, and too large will suppress the signal. Rectifier installation is also used to provide voltage with fixed polarity required for electric welding. The output current of this circuit sometimes needs to be controlled. At this time, the diode in the bridge rectifier will be exchanged with a thyristor, and its voltage output will be adjusted by means of a phase control trigger.