A New Batch Of Electrochlorination Systems Has Been Successfully Developed

Nov 16, 2026

Leave a message

     The ocean is a treasure house of resources - and a proving ground for equipment. For offshore oil and gas platforms, seawater cooling and firewater systems are constantly troubled by marine growth such as barnacles, mussels and algae: pipes become constricted, heat-exchange efficiency drops, and filters clog - at best affecting production, at worst threatening platform safety.

     Recently, in response to a customer's needs, we completed the design and production of a batch of skid-mounted explosion-proof electrolytic seawater chlorination systems (1,500 g/h seawater sodium hypochlorite generators). Built as fully skid-mounted units meeting the installation requirements of hazardous areas on offshore platforms, the equipment will be shipped to the user's site for sterilization and algae control in the platform's seawater cooling and firewater systems.

1. Your Needs, Our Direction

     This batch of units is tailor-made to the user's operating conditions: from seawater dosing calculation, hydrogen-venting air-blower calculation and acid-cleaning tank sizing, to unit data sheets, instrument selection and skid layout design - all completed in-house. The units have a rated available chlorine output of 2×750 g/h, meeting four dosing lines simultaneously - continuous dosing to two 150 m³/h seawater lift pumps and shock dosing to two 727 m³/h firewater pumps, with a normal dosing concentration of 1–2 ppm and shock dosing at 3 ppm.

2. Fighting the Sea with the Sea - Green and Efficient

     Using the sodium chloride naturally present in seawater as raw material, the unit produces sodium hypochlorite solution on site by DC electrolysis. Produced and dosed on the spot, it requires no purchase, storage, transport or handling of chemicals - combining dosing safety with operating economy.

3. Fully Skid-Mounted, Ready to Run on Arrival

     Nine units - pressure reduction, filtration, heating, electrolysis, PLC control, acid cleaning, chemical storage, hydrogen venting and dosing - are integrated on a single skid no larger than 3000×2200×2500 mm. Forklift pockets on all four sides of the base and four lifting lugs on top make it suitable for both road and sea transport. On site, simply connect water and power circuits to start commissioning, minimizing the installation period.

news-1148-964

 

4. Dual-Cell Configuration, Reliability First

     The system uses a dual-electrolyzer configuration in which the two cells can run independently and back each other up. The electrodes use TA2 titanium substrates with a ruthenium-iridium precious-metal-oxide coating; the chlorine evolution potential is no higher than 1.13 V, electrodes carry a 3-year warranty, and electrolyzer service life is no less than 5 years. The high-frequency switching rectified power supply provides constant-current output continuously adjustable from 0 to 100%, flexibly matching chlorine output to dosing demand.

5. Explosion-Proof by Design, Safety as the Guiding Principle

     The unit carries an overall explosion-proof rating of Exd IIB T4; the control box and power supply box both use 316L stainless steel explosion-proof enclosures with IP66 protection. More than ten safety interlocks - seawater flow failure, electrolyzer over-temperature, excessive hydrogen concentration, high/low liquid level in the chemical storage tank, etc. - are all built into the PLC logic. The system supports both automatic and manual operation modes, enabling unattended fully automatic operation.

6. Quality Is in the Details

     The intelligent acid-cleaning unit starts with one button and automatically completes the whole process of draining, circulation cleaning and acid discharge on a 6-month cleaning cycle, compatible with 5–10% dilute hydrochloric acid and eco-friendly cleaning agents. Parts in contact with seawater and sodium hypochlorite are made of corrosion-resistant materials including 316L, TA2 titanium, FRP, CPVC and fluoroplastics. The skid's anti-corrosion coating complies with the NORSOK M-501 standard. When the seawater temperature falls below the set value, a titanium-sheathed heater switches on automatically to maintain electrolysis efficiency under low-temperature conditions.

 

news-1169-876

 

7. Certified by Testing, Backed by Service

     Before leaving the factory, each unit passes, in sequence, the hydrostatic test, the watertightness test, the control system function test and a continuous operation assessment of no less than 72 hours, and meets the third-party inspection requirements of CCS (China Classification Society) for offshore facility products. The complete unit carries a 12-month warranty and the electrodes a 36-month warranty; delivery includes installation, commissioning and operation training, and after-sales support provides 7×24 technical support and lifetime service.

     From a single technical requirement to a fully assembled skid ready to ship: reliable equipment comes from taking every parameter seriously, and lasting trust comes from being responsible for every delivery.

     If you are looking for an answer to marine biofouling in your seawater systems, or need a customized electrolytic seawater chlorination solution, please feel free to contact us.

news-1280-553

Tianjin Furuide Environment Engineering Co., Ltd.

Website: https://cn.iccp-rectifier.com/

Tel: 18522050013

- Tianjin Furuide Environment Engineering Co., Ltd. · Protecting Assets You Can Trust -

Send Inquiry